Zheflon® PVDF 2011—Injection gradeDetail Information
Homopolymer, white granular resin, with low melt viscosity, high melting index, good fluidity, good mechanical strength and toughness, suitable for injection molding process.
White and semi-transparent pellets
Melt flow rate
ASTM D1238, 230℃@5kg
Tensile yield strength
Elongation at break
ASTM D34181.PVDF should be processed under 260℃,to avoid producing toxic gases；2.PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds；3.Operators should take good care of personal protection during the use procedure and processing.
25 kg packages can be provided. PVDF is packed in PE plastic bag and then put into a hard cardboard drum. It must be stored in clean, cool, dry place.