Zheflon® PVDF 2013—Molding grade
Categories PVDF Resin Brand Flurine Model 2013 Appearance White and semi-transparent pellets Melt Flow Rate 1~10 (ASTM D1238, 230℃@12.5kg) Features high melt viscosity and low melting index Application Extrusion molding, insulated wire, Monofilament Update Time 2021-08-02Detail Information
Homopolymer, white granular resin, has high melt viscosity and low melting index. It is suitable for extrusion molding and other processes, and is applied to the preparation of products such as sheet and coiled insulated wire.
White and semi-transparent pellets
Melt flow rate
ASTM D1238, 230℃@12.5kg
Tensile yield strength
Elongation at break
ASTM D34181.PVDF should be processed under 260℃,to avoid producing toxic gases；2.PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds；3.Operators should take good care of personal protection during the use procedure and processing.25 kg packages can be provided. PVDF is packed in PE plastic bag and then put into a hard cardboard drum. It must be stored in clean, cool, dry place.