Professional manufacturer for Fluoropolymer (PVDF) and Fluoroelastomer (FKM). 86-188-8877-8178, sales@flurine.com

Language:

Home / Products / PVDF / PVDF Resin /

Zheflon® FL2005 PVDF- For Fishing line

Categories	PVDF Resin
Brand	Flurine
Model	FL2005
Features	Homopolymer, medium melt viscosity
Uses	Fishing line, OK line, monofilament
Forms	White translucent particles
Grade	Extrusion grade
Update Time	2021-10-22

Contact Now

Detail Information

PVDF Characteristic

Process safety instructions

Packaging and storage

Zheflon® FL2005 is a medium-viscosity grade polyvinylidene fluoride homopolymer with high purity. Important properties include excellent chemical resistance to most aggressive substances and solvents, excellent mechanical strength and toughness, high abrasion resistance, high temperature capabilities, excellent aging resistance, low permeability to most gases and liquids and easily melt-processed by standard methods of squeeze and molding.

General
Features	Homopolymer, medium melt viscosity
Uses	Fishing line, OK line
Forms	White translucent particles
Items	Typical Value FL2005	Test Method
Physical Properties
Density（g/cc）	1.76~1.79	ASTM D792
Melt Flow Rate（g/10min）	1.5~2.5	Load 10kg，230℃，ASTM D1238
Melt viscosity（Kps）	21~25	Shear Rate 100 1/s，ASTM D3835
Water Absorption（%）（Time 24 hr）	≤0.010	ISO 62
Molecular Properties
Molecular weight（Da）	420,000~460,000	GPC,DMF,ISO 16014
Intrinsic viscosity（dl/g）	1.25~1.35	30℃,DMAC
Molecular weight distribution	1.8-2.3	GPC,DMF,ISO 16014
Mechanical Properties
Tensile Modulus（Thickness2.00mm）（MPa）	1800~2500	1.0mm/min,ASTM D638
Flexural Modulus（Thickness2.00mm）（MPa）	1700~2500	2.0mm/min,ASTM D790
Yield Strength（Thickness2.00mm）（MPa）	50.0~57.0	50mm/min,ASTM D638
Break Strength（Thickness2.00mm）（MPa）	20.0~50.0	50mm/min,ASTM D638
Elongation at Yield（%）	5.0~10	50mm/min,ASTM D638
Elongation at Break（%）	20~50	50mm/min,ASTM D638
Hardness, Shore D（Thickness2.00mm）	75~80	ASTM D2240
Thermal Properties
Melting Point（℃）	169~173	ASTM D3418
Crystallization temperature（DSC peak）（℃）	137~144	ASTM D3418
Glass Transition Temp, Tg（℃）	-32	ASTM E1356
Decomposition Temperature（℃）	375	1% wt. loss / in air
Vicat softening point（℃）	135~145	ASTM D1525
Heat distortion temperature 1.8 MPa （Thickness 4.00mm）（℃）	100~120	After annealing 150℃,16h ASTM D648
Electrical Performance
Surface resistance（ohm）	≥1.00E+14	Voltage<1V，After 2 min—500V ASTM D257
Resistivity（ohm·cm）	≥1.00E+14	Intensity=10mA，After 2 min@23℃ ASTM D257
Dielectric strength（Thickness 1.00mm,23℃）（KV/mm）	20~25	ASTM D149
Dielectric constant（1kHz,23℃）	7.0~10.0	ASTM D150
Combustion performance
UL Flammability rating（0.100mm）	V-0	UL94
Oxygen Index（3.00mm）	44%	ASTM D2683